Click image to view full size image
These NC control dividing heads have their center height as 135mm and 210mm, also can be customized into any heights as per his actual requirements;
They can perform indexing of 4 or 6 equal divisions on the workpiece and are used for CNC milling machines and CNC machining centers etc.;
They have internal precision face gear indexing devices which have been hardened and precision ground to ensure high accuracy. And have their indexing positions controlled by the mechanical encoders or proximity switches;
These dividing heads can index and position the workpiece freely at any angle.
They can perform indexing of 4 or 6 equal divisions on the workpiece and are used for CNC milling machines and CNC machining centers etc.;
They have internal precision face gear indexing devices which have been hardened and precision ground to ensure high accuracy. And have their indexing positions controlled by the mechanical encoders or proximity switches;
These dividing heads can index and position the workpiece freely at any angle.
| No | Specifications | NCDH135E | NCDH210E |
| 1 | Center height, mm | 135 | 210 |
| 2 | Turntable diameter, mm | 200 | 315 |
| 3 | Center bore diameter, mm | 30H7 | 80H7 |
| 4 | Center through bore diameter, mm | 80 | 80 |
| 5 | Locating key width, mm | 14 | 18 |
| 6 | T-slot size, mm | 12H12 | 14H12 |
| 7 | Adjacent angle of T-slot, mm | 900 | 600 |
| 8 | Servo power, Kw | 0.18 | 0.37 |
| 9 | Time for rotation, Sec | 5(900) | 12(600) |
| 10 | Max.load compacity , Kg | 30 | 150 |
| 11 | Dividing accuracy, Sec | ±6 | ±6 |
| 12 | Repeatability accuracy, Sec | ±2 | ±2 |
| 13 | Worm gear ratio | 1:72 | 1:82 |
| 14 | Tatol reduction ratio | 1:105 | 1:246 |
| 15 | Net weight, Kg | 82 | 242 |
| 16 | Gross weight, Kg | 88 | 250 |